PDA

View Full Version : Designs for Play N Hookie 2


Play N Hookie II
01-25-2008, 04:10 PM
Hi Some Sailor,

I have put very little thought into this and any advice or reccomendations you have would be great. The boat name is Play N Hookie 2. I added a pic of what the lettering on the side looks like now. I am not sure what type of artwork would look good or at all. I am completely open to suggestions and ideas.
Play N Hookie II
01-25-2008, 04:19 PM
I forgot I would also need WN numbers. The numbers are WN 7568 NW and I would prefer to keep the same font I have on there now and in blue to match the canopy.
Nehalennia
02-02-2008, 10:30 AM
Mike, you mentioned "it's too cold to apply vinyl"
How warm does it need to be?
SomeSailor
02-03-2008, 01:55 PM
Oracal only warrants the material to minimum surface / air application temperature of > 46º F

It has to kick to bond to the gelcoat. You can trick the surface temp, but you can't mess with the air temp too much if you want it to lay down and stay awhile.
Nehalennia
02-03-2008, 09:13 PM
Oracal only warrants the material to minimum surface / air application temperature of > 46º F

It has to kick to bond to the gelcoat. You can trick the surface temp, but you can't mess with the air temp too much if you want it to lay down and stay awhile.


Gotcha
BTW, what will I owe you?
Send me a PM
thanks
Play N Hookie II
02-07-2008, 08:32 AM
Hello somesailor.....are you able to help me with these numbers and possibly a vinyl for the back? What I am really needing now though are the numbers. I have to replace those Oregon tags before I can take her back out and I was hoping to do so within the next 3 weeks. Please let me know.
\

\
I forgot I would also need WN numbers. The numbers are WN 7568 NW and I would prefer to keep the same font I have on there now and in blue to match the canopy.
SomeSailor
02-07-2008, 08:49 AM
I need to get both yours and Todd's done. You guys REALLY need to get some steady temps above 42 to guarantee a good adhesion, but I'll get back to you over this weekend.
Play N Hookie II
02-07-2008, 11:37 AM
no worries....i wasnt sure if you were working on it or not. Just let me know when you have time. Thanks for the reply.


I need to get both yours and Todd's done. You guys REALLY need to get some steady temps above 42 to guarantee a good adhesion, but I'll get back to you over this weekend.